Expert Answers about Forest River Georgetown Motorhome

• Can A Single Gate Valve Be Replaced Or Does The Whole Assembly Have To Be Replaced
• Each gate valve is held in place by four bolts that you can just unscrew and then swap the gate valve out with a new one like Valterra's Bladex # T1003VP and bolt back in place. If your gray gate valve ever needs to be replaced you can use part # T1001VPM. This method means no cutting and gluing in extra fittings for just a simple valve replacement. I've attached a video where I show you exactly how to do this.
  view full answer...


• Replacement Inverter for Tiffin Open Road 36LA
• The Go Power Inverter # 34279458 that you referenced would work great as a replacement for what you have now. And if you currently have the remote wire that matches what the remote of this kit comes with part # 34266886 then you'd be able to reuse it as well.
  view full answer...


• Availability of Plug-In Brake Controller Adapter for 2017 Forest River Georgetown
• Yes, you can use the Tekonsha Plug-In Adapter # 3035-P to install the Tekonsha Primus IQ # TK90160 on your 2017 Forest River Georgetown.
  view full answer...


• Can the MORyde Safe-T-Rail be Installed On a Class A Motorhome
• I really don't have a good answer on why the MORryde Safe-T-Rail Telescoping RV Hand Rail # MR54BR can't be used on a class A motorhome. Realistically, as long as the surface that this is being installed onto is completely flat, free of obstructions, and is made of fiberglass you're fine. If the wall is curved or has corrugated steel walls I'd steer clear and avoid installing this. I do also recommend checking MORryde's website, and read the "Qualifier" PDF to be sure. It can be found...
  view full answer...


• Can a Bent Landing Gear Foot Pad Be Used With a SnapPad?
• The feet on your motorhome's landing gear should not be bent at all, and for a SnapPad like the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet # SP54FR4 you're looking to fit, it's going to need to be replaced. For instance, if you had a Lippert Landing Gear and needed a replacement 9" foot to work with the SnapPads mentioned above, you'd need the Lippert 5th Wheel RV Landing Gear Foot Pad # LC314667.
  view full answer...